Repair Of Meltblown Non-Woven Machine

The production process of the melt-blown non-woven machine is a streamlined process, and any problem in any link may cause production interruption. So when the melt-blown nonwoven fabric machine fails, we must repair it in time.

Mechanical issues
When some mechanical failures occur, it is easier to find and solve them. For example, if a certain drive roller bearing is broken, it will make abnormal noises, and it is easy to find suitable accessories to replace it. Or the reducer of the screw is broken, which will obviously cause speed fluctuations and make loud noises.

Electrical problems
But electrical problems, if there is a failure, are relatively hidden. For example, if a contact of the PLC is broken, it will cause abnormal linkage. A certain drive optocoupler of the frequency converter is abnormal, which causes the motor’s three-phase current to fluctuate severely and even stop due to lack of phase. The parameters of the winding tension are not well-matched, which will cause the winding to be irregular. Or a certain line leaks, causing the entire production line to trip and fail to boot.

The touch screen does not work well
The touch glass of the touch screen needs to be dealt with in time because it is pressed too much, or dust and grease run to the inner cable head, causing poor contact or aging of the touch panel, causing pressing failure or failure.

PLC failure
PLC is generally less broken, but it does not mean that it will not be broken. Generally speaking, the contacts and power supply are mostly burned. Relative to the problem, it is simple and quick to deal with. If the program is lost or the motherboard has a problem, the entire production line will be paralyzed. Find a professional company to help solve it.

Use the power of the inverter and tension control system Because, in this type of equipment, the power used by the inverter and the tension control system is relatively large. If the site does not pay attention to cold cutting and dust removal, it is easy to stop due to high temperature and static electricity during the production process.

Different failure points have different maintenance methods. We need to check the parts of the melt-blown nonwoven fabric making machine and the operation problems frequently.
As a professional melt-blown nonwoven production line manufacturer and supplier, we not only provide high-quality products but also provide customers with one-stop service. If you want to buy our high-quality melt-blown non-woven fabric machine, please contact us immediately!